Fresh Aero Aviation - LED Lighting and tools for homebuilt & Sport (LSA) and general aviation aircraft
Fresh Aero Aviation manufactures and markets high quality innovative products for the homebuilt and general aviation community. We also manufacture and market specific products for Van's RV, Sonex and Grumman AA1 & AA5 Series aircraft.
|
We make EasyBrow Lights for Grumman instrument panels,
illuminating them like they've never been lit before. We're
now giving other aircraft owners the opportunity to install
these great lights in their aircraft.
I f you fly at night, you know that good instrument panel lighting can really make a difference. EasyBrow lighting can be the perfect solution! Just mount Fresh Aero EasyBrow LED Lights on your eye brow above your panel or convenient location and bathe your panel in pure even light.The EasyBrow Lights consist of strips of LEDs only 8mm wide and 2mm thick (about 5/16'x3/32"). These lights can be purchased in 2 inch increments up 4 feet in length with MIL-W-22759 aircraft wire leads soldered and shrink wrapped on one end. We know of no other company that offers this kind of custom flexibility. And EasyBrow lights use only a fraction of the power of incandescent bulbs! The EasyBrow Lights mount easily to almost any surface in any configuration with the attached 3M tape. Other Features Include ---
State of the art LED solid state lighting in blue, red & green and a 2.5 foot length weighs less than 1 ounce (1.5 oz. with the optional protective covering)
Great redundancy! The special series parallel circuitry means that even if you loose an LED (not very likely), only 3 LEDs in a 48 LED 2.5 foot array will fail. You won't even notice!
Available in both 12 and 24 volt dc versions
The EasyBrow lights Illuminate the entire instrument panel with bright and clean light. No halos, hot spots or weak spots – just beautiful even light. The EasyBrow accentuates the needles and indices on the gauges and makes reading the instruments a joy! And unlike dedicated instrument lights, these lights will illuminate your charts on your yoke and lap too.
Very long life cycle. The LEDs on the EasyBrow Light have a life span approximately 60,000 hours!
Many times brighter than the traditional panel lighting and about half the power consumption
EasyBrow lights operate extremely cool with no heat build-up.
All components have a UL flame retardant rating of at least HB 94
They are fully controllable using existing panel rheostats or dimming controls -- from dim to full bright.
We also include a foam bezel that mounts in front of the EasyBrow lights to prevent glare.
These lights bath your panel in beautiful light and will not diminish night vision.
Vibration proof design. Aircraft vibration will not be a factor. |
 |
Fresh Aero panel spotlight We're currently featuring Mike Kellems' EasyBrow lit panel on his immaculate RV3 based in Lewisburg, TN. This aircraft was built by Tony Bingelis, well known EAA columnist and author of four books on homebuilding practices. This RV was the last aircraft Tony built and is Miss January in the 2010 Van's RV calendar. Mike is a Middle TN flight instructor based at LUG and well known in the area as a pilot's pilot. He has built several aircraft and has owned more planes than we can easily count. You can spot Mike and his beautiful RV just about any Saturday morning at one of the Tennessee or Northern Alabama fly-in breakfasts.
|
|||
 |
|||||
 |
|||||
 |
 |
The EasyBrow Lights are available in 2 inch segments of 3 LEDs per segment. A single 2 inch segment is only available in 12 volts dc. Longer segments are available in both 12 and 24 volts dc. Prices are slightly higher for the 24 volt segments. Green and white LEDs are slightly higher too. Please see our shopping cart.
We offer the EasyBrow Light with a protective clear neoprene covering with foam tape that will protect the EasyBrow from contamination if frequently handled. Do you need it? These are our thoughts......
Once mounted, these lights don't see much exposure to contamination as they're nested under the lower eye brow and you don't see them. However, if your passengers frequently grab the eye brow (not a good thing), then you may want to order the protective covering to protect the LEDs. Cleaning will be a breeze too. The downside of the covering is that it thickens the light bar slightly -- about 1/4 inch verses 3/32 inches for the uncovered bar -- so the lights may be visible, depending on your seated height.
Another thought -- the protect covering option is only 2 dollars per foot and the light bar also has the 3M tape mounted. So, if you decide you don't want the covering, you can remove it with a pair of thin bladed scissors (taking care not to damage the LED bar, of course) You can also send it back to us and we'll remove the cover -- no charge, except for shipping.
If you have any questions, just call or email me. Bob
FlightLights EasyBrow Eye Brow Light for Homebuilt and Other Aircraft - Blue & Red LEDs -- per 2 inch section -- $2.50
Green & White LEDs -- per 2 inch section -- $3.50
Two 18 inch MIL-W-22759 aircraft wire leads soldered and shrink wrapped on one end (for any length) -- $4.50
E-mail: info@steelebrook.com