Custom molded mounting base specifically designed for Sonex aircraft. The angled base is mounted with “through the base” mounting holes and nav lights remain level with the wing. Base is primed white and ready to paint any color you want.

Very bright “Wall of Light” combo navigation and position lights – 12 lights total! You will be seen – in every direction

In addition to the above lights, there are four very bright high intensity LED strobe lights on each wingtip with full 360 degree lateral convergence.

 

Meets FAR 91.33©(2) and (3) requirements

Each wingtip unit weighs only 2.8 ounces and the control box is 3.5 x 1.5 x 1.25 inches and weighs just 5 ounces.

Aluminum shielded control box is safely tucked away in your fuselage and not exposed to the elements like some nav lights. This greatly reduces replacement costs if wing tip damage (hangar rash) occurs.

Strobe LEDs are driven with an onboard fully programmable microprocessor. We supply these lights with our unique Quad Rapid Wink light sequence pattern but they can be optionally programmed to any light sequence pattern you desire at a small additional cost. All on and off light durations are fully programmable.

Optional “Molex” type connectors can be specified if you plan on removing the wings regularly

 

Lifetime warranty on the LEDs and control box (see warranty on page 4 of TriNav manual).

The Fresh Aero Sonex Wingtip Nav Light System does it all and all at a very reasonable price – 380 dollars for the entire system, well below that of competitive LED wingtip nav lights.

 

Fresh Aero also offers panel, cabin and taxi/landing lighting solutions for Sonex aircraft – all at down to earth prices.

 

 

 

 

 

 

Download the Sonex Trinav Manual in PDF Format




remember. the trinavs can be installed on other homebuilt aircraft too

These nav lights are perfect for all homebuilts. We mold the Tri nav bases in our shop in Middle Tennessee and we can configure the bases to conform to any other wingtip contour, including a flat base. Mounting procedure may vary slightly. Please call for more information.

Do you need the optional "Molex" type Quick Dis-connect Connectors

 

The quick dis-connects provide an easy way to dis-connect your TriNav wiring when removing your wings. Just plug them in and out!

That being said, if you're not planning on removing your wings, you really don't need these connectors.  We recommend soldering and shrink wrapping your splices for the most reliable and trouble free connections.