Fresh Aero Aviation -
Fresh Aero Aviation manufactures and markets high quality innovative products for the homebuilt and general aviation community. We also manufacture and market specific products for Van's RV, Sonex and Grumman AA-
ABOUT US
CART
HOME
ABOUT US
GALLERY
PRODUCTS
CONTACT US
H f. Copywrite 2016 20042014| Terms & Conditions
Fresh Aero EasySeat Tool for Grumman AA-
Fresh Aero Easy Seat Tool for Grumman AA-
Fresh Aero Easy Seat Tool -
Note: We no longer offer the "Bravo" model Easy Seat Tool. This model was very tough to manufacture and still offer at a decent price. Also, the seat removal procedure is so much easier with the "Alpha" model (with the holes in the seat buckets) as you don't need to contort your body to access the bottom of the seat buckets. If you have an earlier model AA Series Grumman and don't have access holes in your seat buckets, we strongly recommend that you arrange to get this done. It really does make the seat removal job much easier.
Another Note: The Easy Seat tool performs best when the seat bolts are in good condition. If your existing bolts are "wallowed out" and/or have burrs, we recommend that you buy new bolts. We offer new bolts at competitive prices if you need replacements.
Replacement AN24 Clevis Bolts for Grumman front seats — $1.90 each (4 bolts used for both front seats)
Or call us and we can take your order. You can also just provide your email address, and we can send you an e-
Top view with optional ratchet wrench
Top view with optional ratchet wrench
If you’ve ever removed and installed front seats on Grumman AA-
The round head slotted screws that fasten the seats to the seat brackets on the spar are very difficult to remove with a screwdriver. Blade screwdrivers just don’t make it here because the blade slips off the screw due to the tight working quarters and angle of attack of the screwdriver.
To make matters worse, many early Grummans don't have access holes in the seat buckets, necessitating working upside down under the seat -
The Fresh Aero Easy Seat Tool was developed to eliminate the above difficulties and make Grumman front seat removal and installation considerably easier.
The Easy Seat Tool is offered for seats with access holes in the seat buckets. If you have an earlier model Grumman without the seat access holes, we recommend arraigning to have this drilling procedure done as it makes removing the seats so much easier. The holes simplify removing and re-
The Easy Seat Tool consists of a 2 inch deep well socket and embedded blade assembly that captures the head of the existing round head seat screws and remains on the screw as it is removed and re-
The Easy Seat socket is used with a ¼ inch drive ratchet wrench (available from any hardware store or from Fresh Aero as an optional item).
Your seats can be removed and replaced in a fraction of the time. And you’ll have easy access to "under the panel" maintenance like filling your brake reservoirs and servicing your vacuum system filter too.
Once you’ve used the Grumman Easy Seat tool, you’ll never look at front seat removal and installation the same way again.
Look for an Easy Seat Tool Article Here Soon
Optional ¼ inch drive Ratchet Wrench .
Any ¼ inch drive ratchet wrench will work with the Easy Seat Tool. But, if you don’t have one, this high quality wrench can be ordered as an option.
Easy Seat tool -
Top view with optional ratchet wrench
Important note:
We use PayPal for our payment provider. If you’re paying with a credit or debit card and not a PayPal account, just click on the “pay with credit or debit card” at the bottom of the payment page.
